Pricing · Vehicle wraps

How Many Square Feet Does a Vehicle Wrap Take, and What Does Printing Cost?

A full vehicle wrap takes about 245 to 280 square feet of printed vinyl on a sedan, 291 to 334 on a full-size pickup, 303 to 408 on a mid-size or full-size SUV, and 370 to 656 on a full-size cargo van, depending on roof height and wheelbase. At Printwise, printed and laminated vehicle wrap vinyl costs $5.25 per square foot, so the print for a full wrap runs from about $1,104 for a compact car to $3,446 for an extended high-roof Sprinter. Installation is not included: we print and ship, and you or your installer apply it.

The square-footage figures on this page come from the same vehicle database that powers our vehicle wrap calculator: 539 vehicle configurations, model years 1992 to 2026, each measured panel by panel. They are the vinyl a full wrap of the painted body uses, panel by panel, not the bare surface area of the vehicle. Print costs are that area multiplied by the published per-square-foot rate for Avery Dennison MPI 1105 with 1360Z/1370Z lamination, the cast film we print full wraps on. Nothing on this page is a quote; it is the arithmetic you would get at checkout.

Square feet and print cost by vehicle type

Use this table when you know the type of vehicle but not the exact model. The range covers the popular models listed further down; a specific vehicle can fall outside it, which is what the calculator is for.

Vehicle type Printed vinyl, full wrap Print cost at $5.25/sq ft
Compact car and hatchback 236–250 sq ft $1,241–$1,311
Sedan 245–280 sq ft $1,288–$1,468
Coupe and sports car 255–276 sq ft $1,338–$1,451
Compact SUV and crossover 210–281 sq ft $1,104–$1,475
Mid-size and full-size SUV 303–408 sq ft $1,590–$2,144
Minivan 318–333 sq ft $1,668–$1,749
Mid-size pickup 270–275 sq ft $1,419–$1,442
Full-size pickup 291–334 sq ft $1,528–$1,754
Heavy-duty pickup 266–294 sq ft $1,398–$1,545
Compact cargo van 299–349 sq ft $1,570–$1,834
Full-size cargo van 370–656 sq ft $1,943–$3,446

Square feet and print cost for popular vehicles

Exact figures for popular vehicles, sorted by type and then by size. The last column is the perforated window film area for the side and rear glass on the same vehicle, priced at $4.99 per square foot; it is separate from the wrap and only needed if the design continues onto the windows.

Vehicle Wrap vinyl Wrap print cost Window film Window film cost
Ford Focus hatchback 236 sq ft $1,241 39 sq ft $193
Toyota Prius 241 sq ft $1,268 48 sq ft $239
Honda Civic Hatchback 250 sq ft $1,311 37 sq ft $186
Tesla Model 3 245 sq ft $1,288 19 sq ft $96
Toyota Corolla 259 sq ft $1,360 39 sq ft $197
Honda Accord 265 sq ft $1,389 53 sq ft $263
Dodge Charger 275 sq ft $1,443 57 sq ft $286
Toyota Camry 276 sq ft $1,447 46 sq ft $232
Nissan Altima 280 sq ft $1,468 52 sq ft $260
Chevrolet Camaro 255 sq ft $1,338 33 sq ft $167
Tesla Model S 267 sq ft $1,401 45 sq ft $223
Ford Mustang 276 sq ft $1,451 — —
Jeep Wrangler 4-door 210 sq ft $1,104 20 sq ft $99
Honda CR-V 259 sq ft $1,358 44 sq ft $218
Ford Escape 267 sq ft $1,402 31 sq ft $155
Tesla Model X 276 sq ft $1,447 28 sq ft $140
Tesla Model Y 281 sq ft $1,473 31 sq ft $153
Toyota RAV4 281 sq ft $1,475 49 sq ft $244
Ford Explorer 303 sq ft $1,590 59 sq ft $292
Toyota Highlander 320 sq ft $1,682 67 sq ft $333
Chevrolet Tahoe 349 sq ft $1,833 32 sq ft $162
Chevrolet Suburban 365 sq ft $1,914 37 sq ft $183
Ford Expedition 408 sq ft $2,144 — —
Honda Odyssey 318 sq ft $1,668 67 sq ft $337
Toyota Sienna 328 sq ft $1,725 61 sq ft $305
Chrysler Pacifica 333 sq ft $1,749 61 sq ft $304
Chevrolet Colorado 270 sq ft $1,419 30 sq ft $148
Toyota Tacoma, crew cab, short bed 272 sq ft $1,425 23 sq ft $114
Ford Ranger 275 sq ft $1,442 16 sq ft $82
Ford F-150 291 sq ft $1,528 30 sq ft $151
Chevrolet Silverado 1500, crew cab, short bed 321 sq ft $1,683 44 sq ft $220
RAM 1500, crew cab, short box 334 sq ft $1,751 45 sq ft $223
Toyota Tundra CrewMax 334 sq ft $1,754 45 sq ft $223
Tesla Cybertruck 266 sq ft $1,398 44 sq ft $217
Ford F-250 / F-350 289 sq ft $1,517 31 sq ft $153
RAM 2500 / 3500, crew cab, long box 294 sq ft $1,545 52 sq ft $258
RAM ProMaster City 299 sq ft $1,570 39 sq ft $192
Ford Transit Connect, long wheelbase 309 sq ft $1,621 29 sq ft $143
Nissan NV200 309 sq ft $1,622 27 sq ft $135
Mercedes-Benz Metris 349 sq ft $1,834 63 sq ft $314
Chevrolet Express / GMC Savana, short wheelbase 370 sq ft $1,943 34 sq ft $170
RAM ProMaster 1500, low roof, 118" wheelbase 378 sq ft $1,984 79 sq ft $396
Ford Transit, low roof, short wheelbase 382 sq ft $2,003 74 sq ft $369
Chevrolet Express / GMC Savana, long wheelbase 416 sq ft $2,184 74 sq ft $367
Ford Transit, medium roof, long wheelbase 482 sq ft $2,530 97 sq ft $483
Mercedes-Benz Sprinter, standard roof, short wheelbase 490 sq ft $2,573 102 sq ft $508
RAM ProMaster 2500, high roof, 159" wheelbase 497 sq ft $2,609 96 sq ft $477
Ford Transit, high roof, long wheelbase 511 sq ft $2,680 97 sq ft $483
RAM ProMaster 3500, high roof, extended 528 sq ft $2,774 102 sq ft $508
Ford Transit, medium roof, extended length 536 sq ft $2,815 109 sq ft $545
Nissan NV, high roof 601 sq ft $3,156 35 sq ft $174
Mercedes-Benz Sprinter, high roof, long wheelbase 620 sq ft $3,254 118 sq ft $590
Mercedes-Benz Sprinter, high roof, extended 656 sq ft $3,446 118 sq ft $590

A dash in the window film column means the calculator does not carry a glass measurement for that vehicle; the wrap figure is still exact.

What moves the square footage up or down

  • Roof height and wheelbase decide the price on vans. The same Ford Transit ranges from 382 sq ft (low roof, short wheelbase) to 536 sq ft (medium roof, extended length): a difference of $812 in print cost on the same model name. Check the roof and wheelbase before you order, not just the badge.
  • Cab and bed length on pickups. A crew cab with a long bed carries 40 to 70 more square feet than a regular cab with a short bed. The Silverado line spans 279 to 333 sq ft across cab and bed combinations.
  • Leaving the roof unwrapped removes roughly 25 to 60 square feet on most cars and SUVs, and considerably more on a high-roof van. Roofs are rarely seen on commercial vehicles, so this is the first place fleets save.
  • Partial wraps. Sides and rear only, with the hood and roof left in the factory color, typically use 40 to 60 percent of the full-wrap figure. Price it the same way: area times the per-square-foot rate.
  • Bleed and trim. The figures are the panel areas the calculator allocates for a full wrap. Printwise files need 1 inch of bleed on every side of each panel, so if you measure panels yourself, add that inch before converting to square feet.

What the per-square-foot price includes

The $5.25 rate covers the cast vinyl, the print, the protective overlaminate, trimming, a color check before packing, and a free file review before anything is printed. There is no setup fee, no artwork fee, and no minimum order: one door panel is priced at the same rate as a twenty-van fleet. Shipping is calculated at checkout by size and destination, and installation is not something we offer. The full pricing guide covers the other materials (wall vinyl, reflective, high-tack) and what a wrap shop should add on top for labor and margin.

How to get the figure for a vehicle not listed here

Open the wrap calculator, pick the year, make and model, and it returns the vinyl and window film square footage for that exact configuration and passes the number straight into the product page. If the vehicle is not in the database, measure each panel you plan to wrap (height × width, in inches), add 1 inch of bleed on every side, convert to square feet (divide by 144) and add the panels up. File setup is covered in how to prepare a print-ready vehicle wrap file. Order that total on the vehicle wrap collection page; the price updates as you type the square footage.

Frequently asked questions

How many square feet of vinyl does it take to wrap a car?

Most sedans and hatchbacks need 236 to 280 square feet of printed vinyl for a full wrap. Compact cars sit at the low end, full-size sedans such as the Camry, Altima and Charger at the high end.

How many square feet does a cargo van wrap take?

370 to 656 square feet, depending on roof height and length. A low-roof, short-wheelbase Transit or ProMaster is at the bottom of that range; an extended high-roof Sprinter is at the top.

How much does it cost to print a full vehicle wrap?

At $5.25 per square foot, $1,288 to $1,468 for a sedan, $1,528 to $1,754 for a full-size pickup, and $1,943 to $3,446 for a full-size cargo van. That is the printed and laminated vinyl shipped to you; installation is extra and is done by you or your installer.

Does the square footage include bleed?

The figures are the calculator's panel-by-panel vinyl allocation for a full wrap. If you measure panels yourself, add 1 inch of bleed on every side. Since everything is sold by the square foot with no minimum, rounding up costs only the extra feet.

Can I order exactly the square footage in the table?

Yes. Everything is sold by the square foot with no minimum, so you can order the exact figure for your vehicle or round up a few feet for safety.

Related guides: Large custom vinyl decal cost by size · Turnaround time: when your order prints, ships and arrives · Vehicle wrap printing cost guide · Cast vs calendered vinyl · How wrap shops offer full wraps without a printer

Need the print?Avery MPI 1105, laminated, from $5.25/sq ft. No minimum.
Configure a print →
Keep reading

Related guides

All resources →